File:3D Print BambuLabs X1 Espresso Tamper.jpg

Size of this preview: 800 × 360 pixels. Other resolution: 4,000 × 1,800 pixels.

Original file ‎(4,000 × 1,800 pixels, file size: 2.46 MB, MIME type: image/jpeg)

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	11:35, 12 December 2024		4,000 × 1,800 (2.46 MB)	DEFA1337 (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	OnePlus
Camera model	OnePlus 9 Pro 5G
Exposure time	1/60 sec (0.016666666666667)
F Number	f/1.8
ISO speed rating	250
Date and time of data generation	11:39, 3 December 2024
Lens focal length	6.064 mm
Width	4,000 px
Height	1,800 px
Orientation	Normal
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
File change date and time	11:39, 3 December 2024
Y and C positioning	Centered
Exposure Program	Not defined
Exif version	2.2
Date and time of digitizing	11:39, 3 December 2024
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	5.906
APEX aperture	1.82
APEX exposure bias	0
Maximum land aperture	1.82 APEX (f/1.88)
Metering mode	Center weighted average
Flash	Flash did not fire, compulsory flash suppression
User comments	48576
DateTime subseconds	099
DateTimeOriginal subseconds	099
DateTimeDigitized subseconds	099
Supported Flashpix version	1
Color space	sRGB
Sensing method	Undefined
Scene type	0
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	0
Focal length in 35 mm film	23 mm
Scene capture type	Standard