MicroProbes
Revision as of 13:39, 4 April 2024 by Do'h (talk | contribs) (Created page with "We are documenting the creation of Micro Probes for use in exploring electronics and troubleshooting circuit boards. The original discussion for Mucro Probing can be found here: [Approaches to open 3-D printable probe positioners and micromanipulators for probe stations](https://hardware-x.com/article/S2468-0672(18)30041-5/fulltext) We are currently documenting the process of using the 3D Printers in the electronics lab, and we cover some of the basic setup and use of...")
We are documenting the creation of Micro Probes for use in exploring electronics and troubleshooting circuit boards.
The original discussion for Mucro Probing can be found here: [Approaches to open 3-D printable probe positioners and micromanipulators for probe stations](https://hardware-x.com/article/S2468-0672(18)30041-5/fulltext)
We are currently documenting the process of using the 3D Printers in the electronics lab, and we cover some of the basic setup and use of the Prusa FDM printers.
For the Lab we need to first gather our STL files (An STL file is the end product of modeling something in a CAM program) and slice them.